pussykillah
Lid
Ik ben bezig met een kist voor de Kicker Solo X 12 inch 2x2 ohm.
6 ft3 (170L) + port displacement, Fb=45Hz
Port: 60 in2 (387cm2) area x 6” (15.2cm) long
Power Handling = 2000W Peak
De poort inhoud moet 378 cm2 worden.
Ik gebruik 22 mm mdf.
hij moet dus 15.2 cm lang worden.
mijn vraag is dus hoe breed en hoe hoog moet de poort worden. incl. de 22 mm
Dit staat nog in de handleiding van kicker
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
wood “template” inside your SoloX’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add 4 x 4” (10x10cm) triangular bracing between each of the
larger unsupported panels.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for
example the SoloX12 vented compact design’s external port dimensions (45 in2 port area could be a
15 x 3” port by 18.75” long) are, using 3/4” (1.9cm) MDF:
[15” x (3” + 1.5” total MDF thickness) x 18.75”] x (1 ft3 / 1728 in3 ) = .732 ft3, and add this number to
the internal volume of the enclosure, SoloX12’s 3 ft3 + .732 ft3 = 3.732 ft3. See Figure 4. Due to the
necessary length of these ports, you may want to fold the port along the bottom and back walls. It will
be impractical to use round ports for these designs.
Ik kom er dus totaal niet uit. Ik hoop dat iemand me kan helpen.
Grtz
6 ft3 (170L) + port displacement, Fb=45Hz
Port: 60 in2 (387cm2) area x 6” (15.2cm) long
Power Handling = 2000W Peak
De poort inhoud moet 378 cm2 worden.
Ik gebruik 22 mm mdf.
hij moet dus 15.2 cm lang worden.
mijn vraag is dus hoe breed en hoe hoog moet de poort worden. incl. de 22 mm
Dit staat nog in de handleiding van kicker
Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
wood “template” inside your SoloX’s shipping carton to mark the mounting hole, then cut directly on the
line. These designs need internal bracing. Add 4 x 4” (10x10cm) triangular bracing between each of the
larger unsupported panels.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for
example the SoloX12 vented compact design’s external port dimensions (45 in2 port area could be a
15 x 3” port by 18.75” long) are, using 3/4” (1.9cm) MDF:
[15” x (3” + 1.5” total MDF thickness) x 18.75”] x (1 ft3 / 1728 in3 ) = .732 ft3, and add this number to
the internal volume of the enclosure, SoloX12’s 3 ft3 + .732 ft3 = 3.732 ft3. See Figure 4. Due to the
necessary length of these ports, you may want to fold the port along the bottom and back walls. It will
be impractical to use round ports for these designs.
Ik kom er dus totaal niet uit. Ik hoop dat iemand me kan helpen.
Grtz
:jerry:jerry:jerry